مدونة

مدونة

الرئيسية > مدونة

مصنع صفيحة 90 نيمونيك 90

10/27/2025
سبائك: أوستنيتيدوبلكسأوستنيتي فائقسبيكة فائقة أساسها النيكلكوفارالنيكل النقيهاستيلويإنكونيلإنكولويمونيلنيمونيكواسبالويإنفار
المنتجات: أنابيب بدون درزأنابيب شعيرات دقيقةأنابيب ملفوفةالقضبان والعصي والقضبان المستديرةالألواح والصفائحالشرائط واللفائفرقائقأسلاكالينابيعأسلاك اللحاممساحيقأنابيب ملحومةالمثبتاتصماماتأكواع (وصلات أنبوبية منحنية)محابس تي (وصلات تي)شفة

A Nimonic 90 sheet factory specializes in the manufacture of high‐temperature nickel‐chromium-cobalt alloy sheets (grade Nimonic 90, also known as UNS N07090 / W. Nr. 2.4632) used in aerospace, power-generation, and other extreme‐environment applications. Such factories are equipped with specialized melting, rolling, heat-treating and finishing facilities to deliver sheets and plates with certified mechanical and chemical properties.

مصنع صفيحة 90 نيمونيك 90

جدول المحتويات إغلاق
1 Key Features of a Nimonic 90 Sheet Factory
2 Typical Specifications Produced by the Factory
3 Applications of Sheets from the Factory
4 What to Check When Choosing a Factory
5 الأسئلة الشائعة

Key Features of a Nimonic 90 Sheet Factory

الميزة الوصف
Raw material processing Vacuum induction melting or vacuum arc remelting of Nimonic 90 alloy ingots to ensure low impurity levels.
Hot rolling / cold rolling lines Large mills for hot‐rolled slabs, followed by cold rolling or finishing to sheet thickness as required.
Heat treatment & aging Precipitation-hardening, annealing and other heat treatments to achieve the high temperature strength and creep resistance of Nimonic 90.
Finishing & inspection Cut‐to‐size, polishing, pickling, surface finish checks, thickness tolerance measurement, certification.
Certification and export readiness Mill test certificates (MTCs), compliance with ASTM/ASME/BS standards, export packaging logistics.

Typical Specifications Produced by the Factory

المواصفات النطاق النموذجي
السُمك 0.5 mm up to ~50 mm (depends on plate vs sheet)
Width / Length Widths up to ~2000–3000 mm, lengths up to ~6000 mm or more
الإنهاء Hot-rolled, cold-rolled, annealed, pickled, polished
Standard grades Nimonic 90 (UNS N07090 / 2.4632) as primary, includes equivalents
Mechanical properties Tensile strength ~1100-1200 MPa, yield ~700-750 MPa, elongation ~30% (varies)

Applications of Sheets from the Factory

الصناعة التطبيقات
الفضاء الجوي Turbine blades, engine exhaust components, hot‐section panels
توليد الطاقة Gas turbine casings, heat‐exchanger plates, high‐temperature boiler components
Chemical / Petrochemical Reaction vessels, furnace linings, high‐temperature structural parts
Automotive & Motorsport High‐performance exhaust systems, turbocharger components

What to Check When Choosing a Factory

المعيار ما أهمية ذلك
إمكانية تتبع الرقم الحراري Ensures each sheet’s origin and process history is documented for high‐temperature reliability.
Standard compliance Factories should comply with standards such as BS HR202, AECMA PrEN 2298, ASTM/ASME equivalents.
Quality testing Non‐destructive testing, microstructure inspection, mechanical tests ensure performance.
Cut‐to‐size capability Allows customer-specific dimensions and reduces waste.
Export packaging and logistics Proper packaging prevents corrosion during sea/air freight; experienced logistics reduce delays.

الأسئلة الشائعة

Q1: What is the typical thickness range for Nimonic 90 sheets from a factory?
Commonly from about 0.5 mm up to around 50 mm, depending on whether sheet or plate form.

Q2: Can a Nimonic 90 sheet factory provide custom finishes?
Yes — factories often offer finishes like hot‐rolled, cold‐rolled, annealed, pickled or polished, and can supply custom sizes.

Q3: Which industries most rely on Nimonic 90 sheets?
Industries such as aerospace (turbine blades/exhaust parts), power generation (gas turbines/boilers), chemical processing and high‐performance automotive use these sheets extensively.

الرئيسية الهاتف البريد استفسار